Genesis Regulators

Home | Contact Us | Scuba Gear | Genesis

	Patented First Stage by Genesis Scuba.
	An environmentally sealed, extremely high performance  regulator. A regulator's first stage works by taking the air  pressure from your tank and reducing it to a lower,  consistent pressure.  Your first stage will supply this  constant pressure whether your tank is full, almost empty,  or in between.	D.A.D.™ (Dry Air Demand™)
	As you enter the water and begin your descent, the  surrounding water pressure increases. Your first stage must  "sense" this increasing pressure and adjust accordingly.
	Most first stages allow water inside to "push" on a piston or  diaphragm exposing the interior to the harsh elements.  This can cause reduced reliability and more frequent  maintenance.
	Genesis Scuba's new D.A.D. First Stage maintains a  "seal" of air. No water, salt, silt or sand enters your first  stage. Only the correct amount of air is added during  descent to maintain equal pressure.  During ascent, the air  in your first stage expands and the excess is vented.
	The new D.A.D. First Stage is sealed from the environment,  providing greater reliability, less maintenance and higher  performance.
	Exceeds all expectations.
	Titanium - the top choice for the serious diver	Oz™ Titanium - GR650
	Precision machining results in unmatched breathing  performance
	Top-of-the-line performance with half the weight of  traditional regulators
	The first titanium regulator to incorporate Monel internal  parts
	Nitrox (EAN) compatible from the factory up to 40%
	Never worry about the effects of corrosion or rust.  It won't  happen with titanium
	Patented "Diver Adjustable" inhalation
	Pre-dive/dive switch to prevent unwanted freeflow
	Features D.A.D. (Dry Air Demand) 1st stage design
	2 high pressure ports
	4 low pressure ports
	Option:
	300 bar DIN adapter (DIN-300T)
	Innovation at its best.
	Top performing regulator for all extremes	GS2000™ - GR450
	Patented "Diver Adjustable" inhalation
	Pre-dive/dive switch to prevent unwanted freeflow
	Flow rate: 30+ scfm
	ABS/Polycarbonate housing
	Valve: Triple chrome plated, marine grade brass
	302 passivated stainless steel lever
	Brushed metal accent ring
	Orthodontic mouthpiece
	Features D.A.D. (Dry Air Demand) 1st stage
	2 high pressure ports
	4 low pressure ports
	Option:
	300 bar DIN adapter (DIN-300R)
	Superior Simplicity.
	Pre-dive/dive switch to prevent unwanted freeflow	Atlas™ - GR440
	High performance regulator
	ABS/Polycarbonate housing
	Factory set diver inhalation effort
	302 passivated stainless steel lever
	Orthodontic mouthpiece
	Features D.A.D. (Dry Air Demand) 1st stage
	2 high pressure ports
	4 low pressure ports
	Option:
	300 bar DIN adapter (DIN-300R)
	Exceptional dependability.
	ABS/Polycarbonate housing	Yukon™ - GR320
	Factory set diver inhalation effort
	302 passivated stainless steel lever
	Orthodontic mouthpiece
	Features flow-by piston 1st stage
	1 high pressure port
	4 low pressure ports
	Option:
	300 bar DIN adapter (DIN-300R)
	Our highest performing Octo.
	Compact, lightweight design	Genesis Octo - GS040
	Specifically tuned to resist unwanted free flow
	Exhaust tee directs exhaust bubbles away from your face
	Extra long 36" hose
	Bright "hi viz" yellow accents for easy identification
		Sidekick™ - GS065
	In-line inflator hose Octo.
	Replaces loose, hanging octo
	Dive with one less hose
	Convenient, fixed location
	Compact, lightweight design
	Specifically tuned to resist unwanted free flow
	Bright "hi viz" yellow accents for easy identification
		S.K.O.™ Sidekick Octo - GS060
	The ultimate in small Octos.
	Streamlined, flat design
	Stows perfectly in BCD pocket
	Tuned to resist unwanted free flow
	Bright "hi viz" yellow accents for easy identification

Home | Contact Us | Scuba Gear | Genesis